ETA Cuore - Manual (Page 24)

24
GB
/ 40
Slide the lid C on the bracket. Place the bowl D with the ingredients on the stand. Fold the
bracket back only after its arrest has been clicked in.
Removing the propulsion unit (A) – by pressing button B3, the arrest will be released
and it is then possible to remove the propulsion unit A from the fold-out bracket B1.
V. MAINTENANCE
Turn the appliance off and unplug the fork of the supply cord after finishing work
and before each maintenance! Do not use rough and abrasive cleaning agents
(e.g. sharp objects, scrapers, diluents or other dissolvents)! To clean the propulsion
unit A and stand B use soft damp cloth with soap. Make sure that water does not get to
the inner parts. Wash other accessory immediately after use in hot water with soap, rinse
with clean water and wipe dry (you may use the dishwasher – not for the blender G). The
end with the thread of the blender G must not be immersed during cleaning (pic. 10). Work
very carefully when cleaning the blender, the knife is very sharp! Make sure that the cutting
edges of the blender do not come in touch with hard objects that blunt them and thus
decrease their effectiveness.
Some foods may discolour the accessory. This has, however, no effect on the functions
of the appliance and is no reason to take the appliance back. This discoloration usually
disappears with time. Never dry the plastic die-cast over a heat source (e.g. stove,
cooker, radiator).
Storing the appliance and accessory
Wind the supply cord A6 over the rear part of the propulsion unit A and secure it with
a clasp after cleaning. Store the propulsion unit in a dry, dustless place, out of reach of
children and persons sui juris. Store accessory E, F and G in wall holder H (pic. 9).
VI. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal, hand them over at the special collection places where they will be accepted free
of charge. Suitable disposal of the product can help to maintain valuable natural resources
and to prevent possible negative impacts on the environment and human health, which
could be the possible consequences of improper waste disposal. Ask for more details at
the local authority or at a collection site. Fines can be imposed for improper disposal of this
type of waste in agreement with the national regulations. If the appliance is to be put out
of operation, after disconnecting it from power supply we recommend its cutoff and in this
way it will not be possible to use the appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service! Failure to comply with
the instructions of the manufacturer will lead to expiration of the right to guarantee
repair!