Flowserve Byron Jackson Type M - Manual (Page 6)

® Byron Jackson Double Mechanical Seal Submersible Pumping Unit • 1042.293/9 • June 04
Page 6 of 68
Flowserve products or removal of original compo-
nents may impair the safety of these products in
their use.
1.4 Copyright
All rights reserved. No part of these user instruc-
tions may be reproduced, stored in a retrieval sys-
tem or transmitted in any form or by any means
without prior permission of Flowserve Pump Divi-
sion.
1.5 Duty conditions
This product has been selected to meet the speci-
fications of your purchaser order. The acknowl-
edgement of these conditions has been sent sepa-
rately to the purchaser. A copy should be kept with
these user instructions.
NOTE The product must not be operated
beyond the parameters specified for
the application.
If there is any doubt as to the suit-
ability of the product for the applica-
tion intended, contact Flowserve for
advice, quoting the serial number.
If the conditions of service on your purchase order
are changed (for example liquid pumped, tempera-
ture or duty) it is requested that the user seeks our
written agreement before start up.
1.6 Safety
1.6.1 Safety symbols
These user instructions contain specific safety
symbols where non-observance of an instruction
would cause hazards.
Safety symbol and safety
word Meaning
DANGER This symbol indicates an
imminent hazardous situation.
The situation, if not avoided, will
result in death or serious injury.
This symbol indicates a
potentially hazardous situation.
The situation, if not avoided,
could result in death or serious
injury.
CAUTION This symbol indicates a
potentially hazardous situation.
The situation, if not avoided,
could result in minor or moderate
injury.
CAUTION This word indicates a situation
which, if not avoided, could
damage the equipment.
NOTE This sign is not a safety symbol
but indicates an important
instruction in the assembly
process.
The following symbols may be added to the above symbols
This symbol indicates a
potentially hazardous situation
due to hazardous and toxic fluid.
The situation, if not avoided,
could result in death or serious
injury.
This symbol indicates a
potentially hazardous situation
due to strong magnetic field.
The situation, if not avoided,
could result in death or serious
injury to persons with pacemaker
implant.
Further, the situation could
damage instruments and stored
data sensitive to magnetic fields.
This symbol indicates a
potentially hazardous situation in
an explosive atmosphere
according to ATEX.
The situation, if not avoided in
the hazardous area, could cause
an explosion.
Table 1 Safety symbols in these user instructions