Repairs – Flowserve PSS III Seal Durametallic User Manual
Page 7
Repairs
This product is a precision sealing device. The design and dimension tolerances
are critical to seal performance. Only parts supplied by Flowserve should be
used to repair the seal. These parts are available from numerous Flowserve
stocking locations. To order replacement parts, refer to the part code number
and B/M number. A spare back-up seal should be stocked to reduce repair time.
The following parts can also be stocked for emergency needs.
Rotating Face
Split Joint Gaskets
Sleeve Gasket
Gland Gasket
Rotating Face Gasket
Centering Devices
Stationary Face
Setting Devices
Seat Gasket
Cap Screws
Coil Springs
Set Screws
When seals are returned to Flowserve for repair, decontaminate the seal
assembly and include an order marked "Repair or Replace." A signed
certificate of decontamination must be attached. A Material Safety Data
Sheet (MSDS) must be enclosed for any product that came in contact with
the seal. The seal assembly will be inspected and, if repairable, it will be rebuilt,
tested, and returned.
7