Flowserve SoftTools Suite 7.0 - Manual (Page 21)

VLAUG001-00 ©Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611 21 of 21
9. Click the Port Settings tab.
10. Click the Advanced button.
11. Uncheck the Use FIFO buffers check box.
12. Click OK.
13. Click OK on the Properties dialog.
14. Close the Device Manager.
15. Click OK on the System Properties window.
16. Restart the computer.
Flowserve Corporation, Flow Control Division
1350 North Mountain Springs Parkway
Springville, UT, 84663
U.S.A.
801.489.8611
www.flowserve.com