Dolby Laboratories DP569 - Manual (Page 19)

Model DP569 User’s Manual Setting Up
2-5
Table 2-2 Setup Menu Navigation Buttons
Command Result
← or ↑ Displays the previous menu item available on line 2 of the display.
↓ or → Displays the next menu item available on line 2 of the display.
Enter
Enters the menu item on line 2 of the display; changes function
status and menu display accordingly.
Esc
Displays the next higher menu level. If you have changed the
display from the current parameter value without pressing Enter,
Esc returns display to current parameter value.
These commands and results remain constant throughout the setup menu except
during text entry. For details on text entry, see Section 2.5.2, Entering Text.
The commands in Table 2-3 exit the setup menu. (If you are in edit mode of a
parameter, the Status key and the Remote keys do not respond.)
Table 2-3 Commands that Exit the Setup Menu
Command Result
Status Displays current status menu
Remote
Engages the remote control and
displays the main status menu
To return to the setup menu, press Setup. If you engage the remote, to use the front-panel
status menu you must first disengage the remote by pressing Shift,
←, then Setup.
2.5.1 Selecting Parameters
When line 2 of the display includes a flashing cursor, the parameter displayed on that
line is not active. Pressing Enter activates that parameter. Pressing Esc while the
cursor is flashing returns line 2 of the display to the active parameter for that menu.
Example:
Clock Source
Internal 48kHz
with flashing cursor
Press Enter to activate the Clock Source setting. Press Esc to return the display to the
active status:
Clock Source
Digital Input
without cursor
If you press Enter from the active status display, there is no change. If you press Esc,
the next higher menu level displays: