Dolby Laboratories DP569 - Manual (Page 41)

Model DP569 User’s Manual
5-1
Chapter 5
DolbyRemote
5.1 DolbyRemote Overview
The DolbyRemote application, version 2.01, is used to remotely control the DP569.
Key features of the software include:
• Offline mode, without the presence of a unit, to create and edit parameter files.
• Save a unit configuration in a file on a PC. Restore the unit’s configuration
from a saved DolbyRemote file.
• Export an encoder’s configuration in human readable form in either text or
HTML format.
• Control of multiple DP569 encoders from a single instance of the
DolbyRemote application, hardware permitting.
5.2 Installation
5.2.1 PC System Requirements
The minimum PC system requirements include a Pentium 90 processor and either:
• Windows 95 or 98 with 16 MB RAM, or
• Windows NT 4.0, Service Pack 3, and 24 MB RAM, or
• Windows 2000 or Me and 128MB RAM.
We recommended that you dedicate this PC to Dolby applications. If this is not
possible, additional memory may be needed to run other applications simultaneously.
Additionally, a faster processor may be required for newer operating systems.
5.2.2 Software Installation
The DolbyRemote application is installed from two diskettes.
1. Remove any previously installed version of DolbyRemote using the
Add/Remove Program command from the Control Panel.