Flowserve NRGS 16-1 - Manual (Page 13)

13
The measuring range can be switch selected between
≥
0.5 µS/cm and
≥
10 µS/cm
by means of DIP switch :
1. Unscrew screws at the electrode terminal, remove cover , Fig. 6
DIP switch 1– 4 OFF Measuring range
≥
0.5 µS/cm
DIP switch 1– 4 ON Measuring range
≥
10 µS/cm
2. Replace cover and fasten screws
Standard setting
Factory setting NRGS 16 -1
The compact system is delivered with the following factory settings:
■ Measuring range
≥
10 µ S/cm
Switch selection of measuring range
Attention
■ Screwdriver for cross head (“Phillips”) screws, size 1
■ Screwdriver for slotted screws, size 2.5; completely insulated according to VDE 0680
Tools
L L L L L
E E E E E G G G G G
G G G G G E E E E E
■ Do not damage the electronic components when operating DIP switch.