Denso BHT-100Q - Manual (Page 121)

105
Chapter 2. Getting Started the BHT and System Mode
[13.2] Uploading the system message file
Selecting "2:UPLOAD" on the SYSTEM MESSAGE
transfer menu calls up the screen shown at left.
With this screen displayed, the BHT waits for the
system message file to be uploaded.
While the uploading operation is in progress, the
screen shown at left is displayed indicating the file
name and the number of sent records/the total
number of records.
To abort the uploading operation, press the C key.
The screen will switch back to the SYSTEM MES-
SAGE transfer menu.
■ Problem
Downloading has failed.
■ Solution
To retry downloading, press the 1 key.
Pressing the 2 key returns to the SYSTEM MENU.
Check the interface port, communications param-
eters, and communications protocol type in the
SET SYSTEM menu or perform the communica-
tions test in the TEST menu. (Refer to Subsection
2.5.3, [4.5] and [5.5].
⇓