Denso BHT-100Q - Manual (Page 154)

138
■ Problem
Uploading has failed.
■ Solution
To retry uploading, press the 1 key.
Pressing the 2 key returns to the SYSTEM MENU.
Check the interface port, communications param-
eters, and communications protocol type in the
SET SYSTEM menu or perform the communica-
tions test in the TEST menu. (Refer to Chapter 2,
Subsection 2.5.3, [4.5] and [5.5].)
It is also necessary to check the communications
parameters setup of the host computer.
■ Problem
Uploading the BHT system parameter file has
failed.
■ Solution
To retry uploading, press the 1 key.
Pressing the 2 key returns to the SYSTEM MENU.
Check the interface port, communications param-
eters, and communications protocol type in the
SET SYSTEM menu or perform the communica-
tions test in the TEST menu. (Refer to Chapter 2,
Subsection 2.5.3, [4.5] and [5.5].)
It is also necessary to check the communications
parameters setup of the host computer.
■ Problem
The memory has already contained 80 files, so the
BHT system parameter file or system message file
cannot be set up.
■ Solution
Press the C key to return to the SYSTEM MENU
and delete unnecessary files. (Refer to Chapter 2,
Subsection 2.5.3, [ 7 ].)