Denso BHT-100Q - Manual (Page 118)

102
[ 10 ] Downloading/Uploading the System Message File
Pressing the 6 key while holding down the SF key
on the SYSTEM MENU calls up the screen shown
at left.
1 DOWNLOAD: Downloads the system mes-
sage file to the user area of
the BHT.
2 UPLOAD: Uploads the system message
file stored in the BHT.
Select a desired item by using the numerical keys
or M1 and M2 keys, then press the ENT key.
Press the C key to return to the SYSTEM MENU.
SYSTEM MESSAGE
transfer menu
The system message file (named "_ _SYSMSG.FN2") stores system messages, e.g.,
"Shutdown in progress. Do not remove the battery." and "Charge the battery!."
The SYSTEM MESSAGE transfer menu allows you to upload or download the system
message file to/from the host computer.
If you select the "2:UPLOAD," the system will set up the system message file based on
the current settings and upload it to the host computer. After that, the created file will
be deleted.
If you select the "1:DOWNLOAD," the BHT will receive the system message file from
the host computer and apply the stored messages. After that, the received file will be
deleted.
For uploading/downloading, the BHT will use the communications parameters, com-
munications protocol, and interface port specified in Subsection 2.5.3, "[4.5] Setting
the communications environments."
Usually you do not need to use this SYSTEM MASSAGE transfer menu since
system messages have been set at the time of delivery from the factory.