Foxconn Z68A-S - Manual (Page 116)

Appendix
109
3.click “Enable Accelerate”which is under “acceleration”icon,picture 2 will appear. In it you need to
select the size of SSD( Solid-state Driver) allocated for the cache memory,the boot disk or volume
and the acceleration mode.
picture 2
4.After step 2,click “ok”button,picture 3 will appear.Then the setting of Intel smart response
Technology is successful,Hard disk is accelerated.The effect of acceleration depends on the rate
of SSD.
picture 3
SSD will become a part of Hard disk after Enable acceleration.So SSD can be removed
only after Disable acceleration,otherwise Hard disk cannot be used.
CA
UT
IO
N
!