Foxconn Z68A-S - Manual (Page 22)

15
2
15
USb Connectors : f_USb1/2/3/4
In addition to the USB 2.0 ports on the rear panel,
this product also provides 10-pin USB headers on
its motherboard. By connecting through USB cables
with them, user can quickly expand another eight
USB ports on the front panel.
Serial ATA Connectors : SATA_1/2/3/4/5
The Serial ATA connector is used to connect with
SATA Hard Disk or CD devices which support this
feature. The SATA_3/4/5 allows up to 300MB/s
data transfer rate, the SATA_1/2 support SATA
3.0 specification, and allows up to 600MB/s data
transfer rate.
Speaker Connector : SPeAKeR
The speaker connector is used to connect speaker
of the chassis.
We recommend you using an 8-pin ATX 12V power supply. If
you are using a 4-pin power supply, you need to align the ATX
power connector according to the picture on the right.
CA
UT
IO
N
!
Connect a 4-pin
power plug
SATA_3/4/5
GND
TX+
TX-
GND
RX-
RX+
GND
1
NC
PWR
EMPTY
SPEAKER
SPKJ
1
2
3
4
SATA_1/2
GND
TX+
TX-
GND
RX-
RX+
GND
1
1 2
10 9
GND
GND
VCC
D+
D-
D+
GND
D-
VCC
EMPTY
F_USB 1/2/3/4