Foxconn Z68A-S - Manual (Page 32)

3
25
This item is used to change the memeory voltage in a step of 12.5mV. The voltage can be incre
mented from +12.5mV to +500.0mV.
Trusted Computing
► TPM SUPPORT
This item is used to decide whether to support TPM (Trusted Platform Module) device func-
tion. Default option is [Disabled]. If you want to support TPM, first you need to install a TPM
device on the motherboard and set this item to [Enabled], then save changing and reset your
computer, otherwise the operation system can not show the relative information.
CPU Configuration
Version 2.10.1208. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
TPM Configuration
TPM SUPPORT [Disabled]
Current TPM Status Information
NO TPM Hardware
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables or Disables TPM
support. O.S. will not show
TPM. Reset of platform is
required.
Advanced
Version 2.10.1208. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
CPU Configuration
Intel(R) Core(TM) i3-2100T CPU @ 2.50GHz
EMT64 Supported
Max Processor Speed 2500 MHz
Min Processor Speed 1600 MHz
Processor Speed 2500 MHz
CPU ID 206a7
Microcode Revision 14
Processor Cores 2
Intel HT Technology Supported
C1E Support [Enabled]
Hyper-threading [Enabled]
Execute Disable Bit [Enabled]
Intel Virtualization Technology [Disabled]
CPU C6 Report [Enabled]
Package C State limit [No Limit]
CPU Internal PLL Overvoltage [Disabled]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Advanced