GAI-Tronics 234 Stanchion Assembly - Manual (Page 4)

Pub. 42004-194M
234 Stanchion Assembly and Model 234SBA Stanchion Broadcast Assembly Page 4 of 11
f:\standard ioms - current release\42004 instr. manuals\42004-194m.doc
11/12
Use the template provided in the hardware kit for anchor bolt positioning, or see Figure 4 for dimensions.
The 3-inch leg of the anchor bolts should point to the outside of the tube. Center lines should be
measured across the corners.
N OTE : The stanchion should not be mounted until the concrete has been allowed to cure for a minimum
of 24 hours.
Figure 4. Top View