GAI-Tronics 7115-102 SmartSeries Desk-Edge Single and Multi-Party Subsets - Manual

Pub. 42004-642L2E
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 711-102 and 7115-102
Desk-Edge Subsets
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
Product Overview
The Model 711-102 Single Party and 7115-102
Multi-party Desk-Edge Subsets are intended for
use in GAI-Tronics Page/Party
® and SmartSeries
systems.
The subset enables you to perform page and party
line communication when installed with a remote
amplifier and enclosure. The rugged remote
subsets include a pressbar handset, a handset
cradle, and a five-party rotary selector switch
(Model 7115-102 Subset only).
The subset’s compact design allows it to be
mounted where space is limited. The compact size
is made possible by housing most of the support
electronics in a separate remote amplifier.
The angle bracket, supplied with the subset,
supports a wide variety of mounting options. The
integral connectorized cable permits mounting up
to eight feet from the amplifier.
WARNING
Explosion hazard - substitution of components may impair suitability for
Class 1, Div. 2 usage.
Figure 1. Multi-party Outline Diagram