Greenheck High Voltage (100-240 VAC) Sure-Aire Pressure Controller (475742) - Manual (Page 3)

3 Sure-Aire™ Flow Monitoring System
K Factor: Press Edit to
change K Factor. Press
Inc or Dec to adjust, then
press Enter to store the
value.
• 200 to 30,000
Greenheck
Sure-Aire V 1.00
K Factor:
200
Exit Inc Dec
Edit /
Enter
Pressure Units: Press
Edit to change pressure
units. Press Prev or Next
to adjust, then press
Enter to store the value.
• In WC (default)
• Ft WC
• mm WC
• cm WC
• PSI
• In Hg
• mm Hg
• mBar
• PA
• KPA - kilopascals (1kPa = 1000 Pa)
• HPA - hectopascals (1 hPa = 100 Pa)
• Oz In.
Greenheck
Sure-Aire V 1.00
Pressure Unit:
In WC
Exit Prev Next
Edit /
Enter
Measurement System:
Press Edit to change.
Press Prev or Next to
adjust, then press Enter
to store the value.
• English (default)
• Metric
Greenheck
Sure-Aire V 1.00
Measurement System:
English
Exit Prev Next
Edit /
Enter
The following display setting options can be changed in
the Setup menu of the controller:
Display Setting Options and Setup
Menu Options: Current
settings are displayed
in the main display area
of the screen. To review
current settings, press Up
or Down to scroll through
the various controller
settings as outlined
below. Press Home to
return to the main screen.
•
Elevation
• X-Mitter (output signal)
• Software Version
• K-Factor
• Sensor Installed
• Differential Pressure Measurement
• Sure-Air Controller Temperature
• Flow Temperature
• Flow Rate Measurement
• Air Density
Greenheck
Sure-Aire V 1.00
0.0010
CFM
3.96
mA
Setup Up Down Home
Sure-Aire Controller
LCD Touch Display
Air Flow Units: Press
Edit to change Air Flow
Units. Press Prev or Next
to adjust, then press
Enter to store the value.
• CFM (default)
• m
3
/hr
• m
3
/min
Greenheck
Sure-Aire V 1.00
Air Flow Unit:
CFM
Exit Prev Next
Edit /
Enter
Main Display Value:
Press Edit to change
Main Display Value.
Press Prev or Next to
adjust, then press Enter
to store the value.
• Flow (default)
• Pressure
• Temperature
• Air Density
• Output Signal
• None
Greenheck
Sure-Aire V 1.00
Main Display Value:
Flow
Exit Prev Next
Edit /
Enter
Secondary Display:
Press Edit to change
Secondary Display. Press
Prev or Next to adjust,
then press Enter to store
the value.
•
Flow
• Pressure
• Temperature
• Air Density
• Output Signal (default)
• None
Greenheck
Sure-Aire V 1.00
Secondary Display Value:
Output Signal
Exit Prev Next
Edit /
Enter
®