Greenheck High Voltage (100-240 VAC) Sure-Aire Pressure Controller (475742) - Manual (Page 7)

7 Sure-Aire™ Flow Monitoring System
Temperature Sensor
Interconnect the remote temperature sensor by
connecting the temperature sensor to pins 4 and 5 of
TB2. The Remote Temperature Sensor will adjust the
air density value in the controller based on the sensor
measurement when Temperature Compensation is set
to ‘Yes’. This density compensation will affect the flow
rate accordingly. If Temperature Compensation is set to
‘No’, the air density value will be a function of standard
air (70°F/21°C).
Specifications
Service: Air and non-combustible,
compatible gases
Enclosure Rating: NEMA-4 and IP56
Dimensions: 5 x 5-3/8 x 2-1/2 inches
(127 x 136.5 x 63.5 mm)
Mounting: Mount unit in vertical plane
with #8-32 screws
(4 hole locations)
Accuracy: ±0.5% full pressure scale at
77°F (25°C)
Thermal Effects: 0.015% / °F (0.027% / °C) from
-13° thru 185°F (25° thru 85°C)
Stability: < ±1% per year
Max. Pressure Limit: 72 psi (1993 inches W.C.)
Temperature Limits: 32° to 140°F (0 to 60°C)
Power Requirements: 100 to 240 Vac at 50/60 Hz
Power Consumption: Power = 3VA
Output Signal: User selectable. 4-20 mA (900
ohms max.) or 2-10 Vdc
Connections: Euro-type removable terminal
blocks with 1/2 inch watertight
conduit fittings.
Pressure Connections: 1/4 inch quick connect
Weight: 1.5 lbs.
Agency Approvals: ETL #3192905
®