Guntermann & Drunck USB 2.0 Extender EL 4500 - Manual (Page 4)

Introduction
The instructions in this guide assume a general knowledge of computer installation procedures, familiarity
with cabling requirements, and some understanding of USB devices.
NOTE provide additional information that could be useful.
CAUTIONS provide important information about an operational requirement.
Product Contents
Packaged with:
• Local Extender
• Remote Extender
• 5V, 3A power adapter
• 24V, 1A power adapter
• USB Cable (6 ft)
• DVI Cable (5 ft)
• Quick Start Guide
The product is a unique extender product requiring two power adapters, one for the local extender and one for the
remote extender. The provided 5V, 3A power adapter must be connected to the Local Extender and the 24V, 1A power
adapter must be connected to the Remote Extender.
Requirements
To complete the installation, you will also require the following items that are not included with the product:
• A computer with a DVI-D/DVI-I output
• USB 1.1 or 2.0 compatible computer (host computer) with a USB compliant Operating System
• USB 1.1 or 2.0 compatible device(s)
• Cat 5 Unshielded Twisted Pair (UTP) cable with two RJ45 connectors (if using surface cabling),
• OR, Cat 5 cabling with two information outlets and two Cat 5 patch cords with RJ45 connectors
(if using premise cabling)
All references to Cat 5 cable in this document represent the minimum requirement. Category 6 or better or STP cable may
be substituted.
About the KVM - DVI, Audio, USB 2.0, Local Area Network (LAN) Extender
The product incorporates ExtremeLink® technology, enabling users to extend their video and USB anywhere
on the Local Area Network (LAN). It is designed as a remote desktop or KVM (keyboard, video mouse)
extender. The Local Extender and Remote Extender can be connected anywhere within the network and
can operate on a network connection of 100Mbps or 1Gbps and through Ethernet switches. For optimum
performance, a 1Gbps connection is recommended.
note
4
note
note