Dukane 8755E-RJ - Manual (Page 118)

32
e-Shot (Still Image Transfer) Display
e-Shot (Still Image Transfer) Display
The projector can display a still image that is transferred via the network.
Communication Port
The following port is used for e-Shot.
TCP #9716
(9)
e-Shot (Still Image Transfer) Settings
Configure the following items from a web browser when e-Shot is used.
Example: If the IP address of the projector is set to 192.168.1.10:
• e-Shot is not available via communication ports which are used for
the command control (TCP #23 and TCP #9715).
NOTE
) Enter [https://192.168.1.10] into the address bar of the web browser.
) Enter the Administrator ID and Password and
click [Logon].
3) Click [Port settings] on the main menu.
4) Click the [Enable] check box to open the
[Image Transfer Port (Port: 9716)]. Click the
[Enable] check box for the [Authentication]
setting when authentication is required,
otherwise clear the check box.
5) Click the [Apply] button to save the settings.