Dukane 8755E-RJ - Manual (Page 23)


Using the magnify feature
. Press the ON button of MAGNIFY on the remote control.
The “MAGNIFY” indication will appear on the screen
(although the indication will disappear in several seconds with
no operation), and the projector will enter the MAGNIFY mode.
.
Use the cursor buttons ▲/▼ to adjust the zoom level.
To move the zoom area, press the POSITION button in the MAGNIFY mode,
then use the cursor buttons ▲/▼/◄/► to move the area. And to finalize the
zoom area, press the POSITION button again.
To exit the MAGNIFY mode and restore the screen to normal, press the OFF
button of MAGNIFY on the remote control.
● The projector automatically exits the MAGNIFY mode when the input signal is
changed, or when the display condition is changed.
● Although in the MAGNIFY mode, the keystone distortion condition may vary, it
will be restored when the projector exits the MAGNIFY mode.
Operating
Correcting the keystone distortions
. Press the KEYSTONE button on the
remote control. A dialog will appear on the
screen to aid you in correcting the distortion.
.
Use the cursor buttons ▲/▼ to select
AUTO or MANUAL operation, and press the button ► to
perform the following.
) AUTO executes automatic vertical keystone correction.
) MANUAL displays a dialog for vertical keystone correction.
Use the buttons ▲/▼ for adjustment.
To close the dialog and complete this operation, press
the KEYSTONE button again. Even if you don’t do
anything, the dialog will automatically disappear after
a few seconds.
● The adjustable range for correction will vary among inputs. For some input, this
function may not work well.
● When V:INVERT or H&V:INVERT is selected to the MIRROR item in the
SETUP menu, if the projector screen is inclined or angled downward, the Auto
Keystone function may not work correctly.
● When the zoom adjustment is set to the TELE (telephoto focus), this correction
may be excessive. This function should be used when the zoom adjustment is
set to the WIDE (wide-angle focus) whenever possible.
● When vertical degree is almost 0 degree, the automatic keystone distortion
correction may not work.
● When vertical degree is almost ±30 degree, the automatic keystone distortion
correction may not work well.
● This function will be unavailable when Transition Detector is on
(  48).
HOME PAGE UP
PAGE DOWN END
VIDEO RGB SEARCH
FREEZE
OFF
ON
MAGNIFY
ASPECT AUTO BLANK
MUTE
VOLUME
KEYSTONE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
HOME PAGE UP
PAGE DOWN END
VIDEO RGB SEARCH
FREEZE
OFF
ON
MAGNIFY
ASPECT AUTO BLANK
MUTE
VOLUME
KEYSTONE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
-';5610'

#761':'%76'

/#07#.


-';5610'