Dukane 8755E-RJ - Manual (Page 40)

38
SCREEN Menu
Item Description
START UP
Using the buttons ▲/▼ switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen ó ORIGINAL ó TURN OFF
MyScreen is a screen you can register as a desired screen.The
ORIGINAL screen is the existing standard screen. When TURN
OFF is selected, the BLACK screen is used.
• To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLANK screen after several
minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it
will change to the BLACK screen.
• For the MyScreen, please refer to the item MyScreen below . For
the BLANK screen, please refer to the BLANK item (37).
• This function will be unavailable and fixed to Myscreen when
MyScreen Password in the Security Menu is on.
MyScreen
This item functions for capturing the MyScreen of the blank screen
and the start-up screen. Please execute displaying the input
including the picture you want to capture.
. Selecting this item displays a dialog titled “MyScreen”. It will ask
you if you start capturing the picture from the current screen.
Please wait for the target picture to be displayed, and press the
ENTER button on the remote control when the picture is displayed.
The picture will freeze and the frame for capturing appears.
To stop performing, press the RESET or ESC button on the
remote control.
. Using the buttons ◄/►/▲/▼ adjusts the frame position. Please
move the frame to the position of the picture which you want to use.
The frame may not be able to be moved for some input signals.
To start registration, press the ENTER button on the remote control.
To restore the screen and return to the previous dialog, press the
RESET or ESC button on the remote control.
Registration takes several minutes. When the registration is
completed, the registered screen and the message “MyScreen
registration is finished.” are displayed for several seconds. If the
registration failed, the message “A capturing error has occurred.
Please try again.” is displayed.
• This function will be unavailable when MyScreen Password in the
Security Menu is on.
NOTE : The KEYSTONE cannot be adjusted while using the
MyScreen function.
MyScreen Lock
Using the buttons ▲/▼ turns on/off the MyScreen lock function.
TURN ON ó TURN OFF
When the TURN ON is selected, the item MyScreen is locked. Use
this function for protecting the current MyScreen.
• This function will be unavailable when MyScreen Password in the
Security Menu is on.
SCREEN Menu (continued)