Harken 80.2ST Winche User Manual
Page 13
13
Radial Winch
80.2 ST
Installation and Maintenance Manual
Assembly
Make sure that the holes and drainage channels in the base of the winch are not obstructed
Assemble the winch in the reverse order of the sequence in the section on disassembly.
To tighten bolts, use the torque indicated in the disassembly procedure.
The icon on the Stripper Arm Hou-
sing indicates the Stripper Arm final
position.
Change the Stripper Arm Housing
angle to modify the Stripper Arm final
position.
When positioning the stripper arm,
align the peeler with it.
If the jaws have been disassembled,
insert peeler between the two jaws,
taking care that the letters TOP on the
peeler are facing upwards.
OIL
To assemble the pawls
Correctlypositionthespringinitshousing
asshownatleft.Holdthespringclosed
andslidethepawlintoitshousing.Once
inposition,checkthatthepawlscanbe
easilyopenedandclosedwithafinger.
IncaseofdoubtconcerningtheassemblyprocedurecontactHarken
®
TechService: