Harken 80.2ST Winche - Manual (Page 7)

7 Radial Winch 80.2 ST Installation and Maintenance Manual
11. Disassemble the Assy pinion n°33 and the
hub n°32
13. Remove washers n°30 and n°29
Important: The plastic washer must be posi-
tioned in contact with the winch base.
15. Slide out the washer n°5
12. Slide out the shaft n°28
14. Slide out the roller bearing n°6 and the
washer n°5
16. Slide out the final drive pinion n°9