HuddleCamHD 12x - Manual (Page 15)

Ver 1.2 1/26/15
IR Remote Controller (Note: Some buttons do not operate for
all camera models)
0. Standby key
After pressing the standby key,
the camera will go into standby
mode. Press again, the camera will turn on.
(Note: Standby mode power consumption is about
half of normal mode consumption)
1. Number keys
For setting or recalling presets
2. * key
For key combination use
3. Set preset key:
Set preset key + 0-9 number key˖
Clear preset key˖
Clear preset key + 0-9 number key
or˖#+#+#˖clear all the presets
4. BLC control key
BLC ON: Turn on Back Light
Compensation (only works when exposure
mode setting is Auto)
BLC OFF: Turn off Back Light Compensation (Only
available in the exposure mode effective for Auto)
5. Focus control
Focus+: focus farther away
Focus-: focus nearer
Auto focus: automatically focus on item
in center of frame
Manual focus: To use Focus + and -
6. Camera address selection:
Select the camera which you
want to be controlled
7. # key
For key combination use
8. Pan/Tilt control
Press ▲ key: Tilt Up
Press ▼ key: Tilt Down
Press ◄ key: Pan Left
Press ► key: Pan Right
(HOME) key: Return to the middle position
9. Menu setting
Open or close the OSD menu
10. Zoom Control
Zoom ▼Zoom Out
Zoom ▲Zoom Out
11. Camera IR remote control address selection
(*) +(#)+(F1): Camera Address No.1
(*) +(#)+(F2): Camera Address No. 2
(*) +(#)+(F3): Camera Address No. 3
12. (*)+(#)+(F4): Camera Address No. 4