Hummer 2009 H2 - Manual (Page 436)

Removing the Spare Tire and
Tools (SUT)
The jack is stored in the rear cargo compartment on the
passenger side of the vehicle. The tools for the jack
are stored under the rear passenger’s seat.
To remove the tools:
1. Locate the tools by lifting the driver’s side second
row seat up to expose the floor.
2. Remove the strap from the seat rail. Then carefully
slide the tool bag out from under the seat rail as
shown.
Take care to not pinch the seat cables or electrical
harnesses.
3. Open the tool bag. You will find the following tools
needed to remove the spare tire and flat tire:
A. Jack Handle
B. Jack Handle
Extensions (2)
C. Wheel Wrench
D. Wheel Wrench
Extension
E. Wheel Blocks
5-82