Hummer 2009 H2 User Manual

Page 62

Advertising
background image

Second Row Center Position — SUT

1. If the child restraint manufacturer recommends that

the top tether be attached, attach the top tether to
the top tether anchor, if equipped. Refer to the
child restraint instructions and the following steps:

1.1. To access the top tether anchor, raise

the passenger side seat cushion by pulling
up on the strap loop at the rear of the
seat cushion and fold the seat cushion
forward. Then fold the seatback forward.
See Split Folding Rear Seat on page 1-11 for
additional information.

1.2. Place the child restraint in the center seating

position.

1.3. Find the top tether anchor at the rear base of

the center seat.

1.4. Route and attach, but do not tighten, the top

tether according to your child restraint
instructions and the following instructions:

If your child restraint has a
single tether, route the
tether over the seatback.

1-58

Advertising