IBASE FWA6304-D25 - Manual (Page 10)

FWA6304-D25 Series User’s Manual 9
J4: VGA Header
Signal Name Pin # Pin # Signal Name
DACR 1 2 +5VCRT
DACG 3 4 GND
DACB 5 6 NC
NC 7 8 CRT_SPD
GND 9 10 HSYNC_C
+5VCRT 11 12 VSYNC_C
GND 13 14 CRT_SPCLK
GND 15
J6:PS2 KB/MS Header
Pin # Signal Name
1 KBDATA
2 KBCLK
3 MSDATA
4 MSCLK
5 GND
6 +5V
J7: Slim Type II Compact Flash Connector
J8: COM2 Serial Port
Pin # Signal Name (RS-232)
1 DCD, Data carrier detect
2 RXD, Receive data
3 TXD, Transmit data
4 DTR, Data terminal ready
5 Ground
6 DSR, Data set ready
7 RTS, Request to send
8 CTS, Clear to send
9 RI, Ring indicator
10 No Connect.
J9: AT_12V Connector
J9 is a DC-in internal connector supporting +12V.
Pin # Signal Name
1 +12V
2 Ground
Note: Do not connect J9 and J11 at the same time.
J10: USB Header
Signal Name Pin # Pin # Signal Name
VCC 1 2 Ground
USB1- 3 4 USB2+
USB1+ 5 6 USB2-
Ground 7 8 VCC