IDK VAC-5000HD - Manual (Page 19)

VAC-5000HD User’s Guide
19
7 Menus
● Setup menus: setting input and output in normal use
● Maintenance menus: checking operation
● Status display menus: displaying statuses of input and output
Note: Normally, the maintenance menu and status display menu are not displayed as a default.
To display them, use the setting menu number [F99].
7.1 Menu list
■ Setup menus
[Table 7.1] Setup menus
Description
Setting
Set value Default
7.2.1 [F01 to F03] Copying EDID OUT1 to OUT5 OUT1
7.2.2 [F10] Setting EDID SVGA to QWXGA 1080p
7.2.3 [F12] Setting external EDID OUT1toOUT5 OUT1
7.2.4 [F14] Setting copy EDID Copy data 1 to 3 Copy data 1
7.2.5 [F16] Setting No-signal input
monitoring time of Video signals
OFF/2 to15 [sec] 10 [sec.]
7.2.6 [F20] Setting Deep Color 24/30/36 [bit] 24 [bit]
7.2.7 [F22] Setting PCM Audio 32/44.1/48/88.2/96/192 [kHz] 48 [kHz]
7.2.8 [F24] Setting AC-3 Dolby Digital
Audio
OFF/32/44.1/48 [kHz] OFF
7.2.9 [F26] Setting AAC Audio OFF/32/44.1/48/88.2
/196 [kHz]
OFF
7.2.10 [F28] Setting Dolby Digital Plus
Audio
OFF/32/44.1/48 [kHz] OFF
7.2.11 [F30] Setting DTS Audio OFF/32/44.1/48/96 [kHz] OFF
7.2.12 [F32] Setting DTS-HD Audio OFF/44.1/48/88.2/96/176.4
/192 [kHz]
OFF
7.2.13 [F34] Setting Dolby TrueHD Audio OFF/44.1/48/88.2/96/176.4 /192
[kHz]
OFF
7.2.14 [F36] Setting Audio channel 2 channel/
3 (2.1) channel/
6 (5.1) channel/
8 (7.1) channel
2 channel