IDK OPF-H1000-A - Manual (Page 11)

OPF-TH1000-A/OPF-RH1000-A User’s Guide
11
4. Part names and descriptions
4.1 Transmitter (OPF-TH1000)
POWER
SIGNAL
POWER
SIGNAL
R
X
O PTICAL Tx for HDMI O PF-TH1000-A
D
C
5V
2A
FG
O
P
T
IC
A
L
IN
P
UT
H
DM
I
T
X
R
S
-23
2C
Tx
IN
P
UT
AU
D
IO
D
IP-S
W
CLASS 1 LASER PRODUCT クラス 1 レーザ製品
①
②
③
④
⑤
⑥
⑦
⑧
⑨
Panel drawing (OPF-TH1000)
# Part name Description
① HDMI input connector Input connector for HDMI signals
Connect source devices such as Blu-ray players.
② I/O connector for
extension
Digital optical signal I/O connector for extension
Factory installed SFP module allows fiber optical cables to connect
OPF-TH1000 (transmitter) and OPF-RH1000 (receiver).
③ AC adapter connector Connector for the supplied AC adapter.
④ Cable fixing hole Hole for the attached cable clamp
⑤ RS-232C port Port for D-sub 9 pin
⑥ Audio input connectors Input connector for audio signals
Analog audio signals cannot be embedded to HDMI; they are sent
independently.
⑦ Frame ground Ground for indoor ground terminal
⑧ LED lights POWER: Lights when power is supplied from the AC adapter.
SIGNAL: Lights when video signal is valid.
TX: Lights when valid codes are sent.
RX: Lights when the receiver fiber receives valid codes.
⑨ DIP switches Switches for changing each setting
DIP SW1 to 4: No feature is assigned on transmitter; please do not
touch.