ilve Freestanding Cookers - Manual (Page 13)

Always ensure the oven is in manual mode .
The pot symbol with the steam coming from
it should be displayed. If there is an [A] on the
display it means that the oven is in auto mode,
to cancel this you must press both pot symbol
buttons simultaneously. The oven will
not operate if it is pre-programmed; it has to
be brought back to manual mode.
1. To set or adjust the time:
Press both pot buttons simultaneously
and then to adjust the timer press either the plus
or minus button accordingly.
2. To set the alarm:
Hold in the bell button then the plus button
until you reach the required time. If you go over the
required time, press the minus button to bring it
back. You will now notice a bell symbol on the
display, this highlights that the alarm is on. If you
need to check how much time is left on the alarm,
press the bell button again as this will return
to the time display. When the alarm goes off the
oven will remain on and will ring for seven minutes
unless turned off, which can be done by pressing
the bell button. You can adjust the tone of the
alarm-only when the alarm is ringing press the
minus button and it will scroll through three
available tones. Select the tone that you require,
this tone will then sound the next time
you set the alarm.
3. Pre-programming the oven:
Press the button. Put in the duration that you
want to cook the item for by pressing the button.
Press the button. Select the time that you
want the item to finish cooking (by pressing the
button). You then need to select the mode
and temperature.
Digital clock (24 hour clock) Key
Minute
minder
Automatic
cooking
time
End of
cooking
time
Clock
Timer
settings
Clock
clocks & timer controls
freest
anding cookers
13 ILVE Freestanding Operating Manual