Inova Labs XYC100B-SPT - Manual (Page 10)

8
Fan Inlet Vent
FAA Approval
Sticker (located
on bottom)
Cannula
Nozzle Fitting
Control Panel
Fan Outlet
Vent
External
Battery Port
PART NAMES
Cannula Nozzle Fitting: The Nasal Cannula connects to the oxygen
output nozzle at the top of the POC. DO NOT place the cannula into
nasal passages until the POC is fully powered on. Breathing through
the Cannula during start-up may prevent the system from powering
on.
Control Panel: All user controls are located on this panel. See User
Controls section on page 6 for details.
Fan Inlet Vent: Cooling air is drawn in through this opening.
(See Maintenance section for cleaning instructions.)
Fan Outlet Vent: Processed air is exhausted through this opening.
External Battery Port: Connect the External Battery, if purchased,
to this port. (This connection is to be used solely with the specified
external battery.) Precaution: Please pay attention to the orientation
of the connector. Wrong alignment could cause damage to the
connector.
FAA Approval Sticker: Located on the bottom of the unit.