Inova Labs XYC100B-SPT - Manual (Page 8)

Indicator Lights: Colored LED lights indicate either a change in
operating status or a condition that may need response (alarm).
Audible Signals: An audible signal (beep) indicates either a change
in operating status or a condition that may need response (alarm).
Audio response will vary among users depending upon hearing
abilities.
Pulse Setting Control Buttons: There are three individual Pulse
Setting Control Buttons on the Control Panel: 1, 2, and 3 which
reference oxygen flow. Use the setting prescribed by your doctor.
Power Button: To turn the LifeChoice Activox POC on or off, press
the Power Button.
Auto Mode Indicators: There are two inhalation sensitivity modes
on the control panel: Active-High and Sleep-Low, which automatically
adjust based on oxygen demand (e.g. breathing patterns) requirements.
(Reference Control Panel diagram.)
Mute Button: The POC features a mute function to disable audible
alarms during operation. If an alarm has been muted, the amber Mute
Button LED will be illuminated. (Reference Control Panel diagram.)
CAUTION: Please use this function appropriately as it silences
important audio signals regarding the status of the POC.
INT and EXT Indicators: These LED lights will indicate
which power source the unit is using or charging. The INT LED
represents the Internal Battery, while the EXT LED represents the
External Battery.
Battery Check Button: Displays the battery charge level of the
internal, and if connected, external battery.
6
Battery Charge
Indicator
Alarm Indicator
Pulse Setting
Control Buttons
1, 2, 3 LPMeq
Power Button
Auto Mode
Indicators
Control Panel
Mute Button
Battery Check
Button
INT & EXT
Indicators
Hour Meter
Button
For use by
trained service
personnel only
USER CONTROLS