InSinkErator WX-300 - Manual (Page 6)

7
PERSONAL INJURY
• For safe operation, The minimum required distance
from the table top or trough to the mounting fl ange
is 6 inches for standard body disposers
(as specifi ed by UL). See Figure 5.
• Moving shredder parts may cause serious injury if
a hopper or cone is not properly installed.
DISPOSER MOUNTING
The disposer can be mounted to the sink or trough
using a standard InSinkErator mount or an
InSinkErator mounting adaptor.
NOTE: The InSinkErator #5 Sink Flange can not be
used with the Waste Xpress system.
NOTE: InSinkErator must approve attachment to a
non-InSinkErator sink.
PROPERTY DAMAGE
To avoid excess vibration, InSinkErator
recommends a minimum countertop thickness
of 16 gage stainless steel.
Figure 5.
CLEAN THE DRAIN LINE
With a drain line auger, clear away all hardened waste
material in the horizontal drainpipe running from the
drain trap to the main waste line.
Installing Disposer
6 inch min.