Interlink Electronics MicroModule PS2 - Manual (Page 11)

www.interlinkelectronics.com
9
PS2 MicroModule
Integration Guide
6.2 PS/2 Interface Connections
The following table shows the pin-out for PS/2 connection to the J2 header. J2 is the 8-pin,
1.25 millimeter-center header on the back of the MicroModule PS/2’s circuit board.
J2 Pin Signal
Signal
Description
1 VCC +5 V
2 NC --
3 NC --
4 GND Ground
5 NC --
6 NC --
7 CLK Clock
8 DATA Data
Table 1: PS/2 connector pin-out