Interlink Electronics FSLP Sensor - Manual (Page 14)

www.interlinkelectronics.com
12
Force Sensing Linear Potentiometer (FSLP)
Integration Guide
6.0 Actuator
The Interlink Electronics FSLP has a protective graphic overlay; this allows for a finger or custom
stylus to be used.
7.0 Orderable Part Numbers
 Hardware Development Kit (54-00019)
o
QTY 1 Demo Board with FSLP Standard Sensor
o
QTY 10 FSLP Standard Sensors
o
QTY 10 FSLP 10cm Sensors
o
QTY 1 Pack of 5 Connectors, 4 Pin Side Entry Female
o
QTY 1 USB Flash Drive with Product Literature
 FSLP Integration Guide
 FSLP Data Sheet
 FSLP, Standard, Black Top Layer with White Graphics (34-00003)
 FSLP, 10cm, Sensor with Female Contacts (34-00022)
 FSLP, 10cm, Sensor with Solder Tabs (34-00024)
 FSLP, 10cm, Sensor with Female Contacts & Housing (34-00025)
 FSLP, 10cm, Sensor with FFC Tail (34-00034)
8.0 Intellectual Property & Other Legal Matters
Interlink Electronics holds several domestic and international patents for its Force Sensing
Resistor technology. FSR and Force Sensing Resistor are company trademarks. All other
trademarks are the property of their respective owners.
The product information contained in this document provides general information and guidelines
only and must not be used as an implied contract with Interlink Electronics. Acknowledging our
policy of continual product development, we reserve the right to change, without notice, any detail
in this publication. Since Interlink Electronics has no control over the conditions and method of
use of our products, we suggest that any potential user confirm their suitability for their own
application.