Kanguru Mobile Workspace v100 User Manual
Page 10
10
7. Click on Create. Your Windows To Go workspace will now start being created on the USB flash
drive. This may take several minutes to finish. Warning! Creating the Windows To Go workspace
will also format the drive. Backup any critical data saved on the drive before proceeding. Do not
remove the drive while the Windows To Go workspace is being created.
8. When finished, select what boot option you would like to use:
○ Yes : This Windows 8 Enterprise PC (host) will always try to boot from any bootable USB flash
drives connected during bootup. If you connect the Windows To Go USB flash drive to another
host PC, then you will have to manually configure the computer to boot from a USB flash drive.
○ No : In order to boot from your Windows To Go USB flash drive, you will have to manually
choose to boot from a USB flash drive from the boot menu or set your BIOS or UEFI to have
the USB flash drive listed first in the boot drive priority list.
9. To finish setting up Windows To Go click on Save and restart.
10. When you have booted from the Windows To Go USB flash drive for the first time, check the I
accept the license terms box, and click on Next.
11. When finished, make sure that you have internet access. Sometimes you may need to setup the
wireless or ethernet network from the host PC for your Windows To Go workspace before you have
internet access.