Standard Horizon HX-150S User Manual
Page 7
HX150S
Owner’s Manual
page 5
o
SCAN KEY
Starts scanning programmed channels. Stops the transceiver from
scanning when pressed during the scan.
!0
H/L KEY
Toggles between high and low power. To change from low power to
high power on Canadian channel 13, USA channel 13 or 67, press and
release this key and hold down the PTT switch. High power setting is
canceled after the transmitting on these channels.
!1
Lamp/ Key Lock KEY
Turns the lamp for LCD backlighting on and off.
Hold down this key to lock the displayed channel functions (except for
the H/L, PTT, PWR and Lamp/ Key Lock
keys) so they are not
accidentally changed. The key lock symbol “
” appears when the
channel is locked. Hold down this key until the key lock symbol
disappears to unlock the channel.
!2
Antenna Connector
Connects the flexible antenna CAT150.
!3
Battery Tray with Battery Pack
Provides DC power to the transceiver
!4
Belt Clip
To remove the belt clip, pull the stopper and slide the belt clip upward.
!5
DC IN Connector
Connects the wall charger CWC231. (see section 5.3)
STOPPER