Standard Horizon HX-870 - Manual (Page 99)

Page 99 HX870
13.7.2 Key Timer
1. Press the MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
SELECT
DIMMER
LAMP
CONTRAST
KEY BEEP
BATTERY SAVE
STROBE LED
SOFT KEY
CONFIGURATION
BACK SELECT
KEY ASSIGNMENT
BACK
CONFIGURATION
KEY TIMER
SELECT
SOFT KEY
3sec
BACK
CONFIGURATION
5sec
7sec
10sec
15sec
ENTER
KEY TIMER
2. Select “SETUP” with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select “CONFIGURATION” with the CH▼/
CH▲ key, then press the [SELECT] soft key.
4. Select “SOFT KEY” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
5. Select “KEY TIMER” with the CH▼/CH▲ key,
then press the [SELECT] soft key.
6. Press the CH▼/CH▲ key to select the
desired time.
7. Press the [ENTER] soft key to store the
selected setting.
8. Press the CLR key to return to radio opera-
tion.
13.8 RESET
You may initialize the memories and settings of the setup categories indepen-
dently or return the transceiver to the original factory setting.
1. Press the
MENU key to display “MENU”.
DSC SETUP
GM SETUP
BACK
SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
CONFIGURATION
SELECT
LAMP
CONTRAST
KEY BEEP
BATTERY SAVE
STROBE LED
SOFT KEY
RESET
CONFIGURATION
BACK SELECT
DSC
BACK
CONFIGURATION
CHANNEL
WAYPOINT & GPS
CONFIGURATION
FACTORY
ENTER
RESET
2. Select “SETUP” with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select “CONFIGURATION” with the CH▼/
CH▲ key, then press the [SELECT] soft key.
4. Select “RESET” with the CH▼/CH▲ key, then
press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select the
desired category. You can select one from
“DSC”, “CHANNEL”, “WAYPOINT & GPS”,
“CONFIGURATION”, or “FACTORY” (all settings
except the MMSI will be initialized).
7. Press the [ENTER] soft key to store the
selected setting.
8. Press the CLR key to return to radio operation.