Diasonic Tech DDR-3128R - Manual (Page 10)

How to Play Voice Part
Choose the message that you want to listen.
Choose one file among A, B, C and D, and select the file with FILE button.
By moving PLAYBACK dial up and down, select the number of the
message.
It starts to play after pressing PLAYBACK dial.
Adjust the volume with DIGITAL VOLUME button.
Since it is super-mini speaker, you should be careful to listen to the
messages in quiet places.
If you are interrupted by noise, use an earphone.
If you want to stop the player, press REC/STOP button.
If batteries are used up completely, LCD will let you know it with "BAT
(low battery)", and power will be turned off automatically after warning.
Then, change batteries and start the player again. At first stage, you
can listen to every message in the recorder from the first to the last one
by pressing PLAYBACK button. If you want to listen to just one of
messages and stop, press MENU button when the player does not
work. And then if MODE appears on screen, choose "OFF" by
selecting "CONT" with PLAYBACK dial.
Playback of MP3
Convert to MP3 by using FILE button.
If you do not have any downloaded songs through USB, "MP3" sign will
be on your LCD screen.
MP3 music files can be played by PLAYBACK dial after downloading
through USB.
Backward and Forward Playback While Playing
You can check both next and previous messages by moving PLAYBACK
dial upward and downward while it plays one message.
To keep pressing PLAYBACK dial can bring messages forward or
backward fast. (SEARCH function)
How to Set ARS
Press MENU button and select ARS while player is in the stopped
position, When ARS is ON, recoding will pause automatically when
there is no sound present so that you can save and minimize
recording time ("ARS PAUSE" will appear repetitively while it is in
action). When ARS is set to A-mode, the record process is performed
within the current index one after another. When ARS is set to, B-
mode, the record process is performed with next index one after
another. New recoding will start after each pause.
How to Check Remaining Recording Time
In MENU, you can set the list of playback or recording in the order of
playing time. The list of playing will appear in the order of amount of
playback or remaining time during playback, and the list of recording
will appear in the same order while recording.
Recording Monitor Function
If you connect an earphone with a player, you can monitor the
content or sound during the recording process. Adjusting volume of a
player cannot control volume of recording.
Separating Files While Recording
As for user's demand, files can be separated from each file.
By pressing FF/KEY, you can record in the next index continuously
so that you can easily distinguish from one index after another.
Caution
-. Do not take out batteries during the process. Details of recording can
be erased or be worked irregularly. You must take out them after you
check the device stops working completely.
-. If there are no more available numbers to save details of recording,
you cannot record any more. If available amount of time that you can
use for recording is filled up, it says "FULL" and lets you know
immediately.
Before recording, please check the available space, file or time that
the player can offer, and erase unnecessary parts. (See No. 10 to
learn how to erase recorded details)
-. You cannot record as the route of MP3 or H/D. When the recording
process once starts, the previous recording convert into A FILE of
VOICE part, and then the process begins. (MP3 is only available for
playback)