Diasonic Tech DDR-3128R - Manual (Page 15)

DVR-Explorer is a managing program for DDR-3000 SERIES which
transfer or plays MP3 files from computer to DDR-3000 SERIES, it
manages recorded voice or FM radio file (DVF) from DDR-3000
SERIES and has following features.
Transferring(upload/download) file to/from the DDR-3000 Series -
MP3,DVF and normal data files
Similar structure as Window Explorer(r) for file managing
Plays MP3, MP2, WAV, Audio CD, playlist
DVF/WAV two way convert
Convenient transfer of file using transfer list
Various spectrum, equalizer, effect support
CDDB feature
Convenient instruction manual
Minimum System Requirement for the DDR-3000 Series software:
Pentium 200MHz
64MB Memory
20MB Empty Hard Disk Space
256bit Color
Window 98/ME/2000/XP(NT Not Supported)
USB Port
CD-ROM Drive
Sound Card, Speaker or Headphone(option)
Note: This function is available only for the models that have the radio
function. If you want clearer sound when you listen to the FM
radio, use the supplied earphones which will act as an antenna.
AUTO SEEK is convenient function when you listen to the radio.
If you press and hold the FF or REW button for 2 seconds, it will stop
automatically on the radio stations that the player can receive signals to.
Sometimes AUTO SEEK functions cannot TUNE to the stations
accurately. In this case, control minutely with the REW or FF button.
How to Set Radio Channels(Stations)
Select Radio Mode by pressing RADIO button.
LCD will display waves. Select the station that you want to listen to by
using the FF/REW button.
How to Save Radio Stations
Press RADIO button, and select RADIO mode.
LCD will display waves. Select the station that you want to listen to
by using the FF/REW button.
If you press PLAY button, "01" sign will flash on the screen where
"FM" sign appeared. Then, choose the channel that you want to
save to (1~10) by using the FF/REW button, and press PLAY button.
"FM" sign shows up as the channel is saved. In the same way, you
can save up to 10 channels.
Confirming saved channels
If you press MENU button for 1 second, saved channels and signals will
show up. Then, confirm savings with FF/REW buttons. Again, press
MENU button for 1 second and choose signals and stations that you
want to save.
How to Record Radio Broadcast
Select the radio station that you want to record following the step 1~2 of
"How to Save Radio Stations".
Press REC button and start recording. In this case, the recorded
message is saved in the index and VOICE files. If you stop playing MP3
and choose radio mode, the message is recorded in A file of new index.
You cannot check the condition of message while recording. After stop
recording, you can see the condition in VOICE part.
If you want to check the condition of recorded message, see 11. of "How
to Play in VOICE mode"