Diasonic Tech DDR-3128R - Manual (Page 16)

(6) Searched USB driver file and click on ' NEXT ' button.
(7) Click on ' NEXT ' button to finish wizard.
(8) Once USB drive setup is completed, check for setup progress from
device manager at My Computer.
If DDR-3000 SERIES is not after software is opened. Check for
USB device on PC, and for proper connection of Cable.
(1) Insert the DDR-3000 Series setup CD into the CD-ROM drive and it
will start automatically. If Auto-run doesn't work execute setup file
"CD-ROM:\setup.exe" or "CD-ROM:\Voice Bank\setup.exe". Setup
will progress automatically. Once setup is completed software icon
will be installed in the START Menu.
(2) Using the supplied USB Cable connect the USB port terminal on the
DDR-3000 Series to USB port on the Computer (PC ONLY). Then,
"New Hardware detected" will execute and end automatically.
Restart System to complete the software setup.
(3) Connect DDR-3000 SERIES to the PC using the USB cable. 'New
Hardware Detected' will run automatically, then click on 'NEXT'
button.
(4) Select 'Search suitable drive for device' and click on ' NEXT ' button.
(5) Select CD ROM drive and click on ' NEXT ' button.