Diasonic Tech DDR-3128R - Manual (Page 9)

How to record
You can record up to 99 messages (files) in each of the four (A, B, C and
D) folders.
Press the file button to select the appropriate folder that you want to
record to.(Choose one among A/B/C/D)
Place the device or microphone to face the source of the sound, then
press REC/STOP button for 1 second. As soon as the recording process
begins, LCD screen will display the number, mark and time of recording,
and red LED light will flash.
If you want to stop recording, press REC/STOP button again.
It is impossible to stop the recording within 5 seconds after you press
REC/STOP button.
It does not stop even if you press STOP button.
When you press REC/STOP button, the content of recording will be
saved as the last taken number so that you don't have to search for
unrecorded parts as done with tape recorders.
Don't forget to change the batteries to new ones when you want to record
for a long time.
Check the remaining battery icon before you start recording.
Caution
For successful recording, conduct mock recordings as a pretest.
If batteries are used up while recording, LCD screen will display
"LO.BT(low battery)" sign, and power will be turned off automatically.
Then, change batteries.
How to Set REC Mode
Press MENU button when player is not playing/recording, MODE will
appear on LCD screen.
Move PLAYBACK dial up and/or down to choose the desired record
mode (SHQ/HQ/SP), then press the dial in. Highest quality of
recoding can be achieved by setting the record mode to SHQ.
Move Playback dial upward and downward, (2) press button in
When setting menu, (1)move the button up and down(when it is moving
up and down, playback dial does not work), and (2) press button in.
Then the section of menu is set.
(1) Move the button up and down (2) Press button in.
Before you start recording, you need to set date and time first.
Press MENU button. It will show you "MODE" sign.
Move PLAYBACK dial up and/or down, and choose SET mode, then
press PLAYBACK dial in. Number of year will flash. Choose each
number of year and press PLAYBACK dial in.
Repeat the procedure to set month, day and time.
SET DATE MODE
When you finish setting time and date, press MENU button, and go
back to first stage.
Press
PLAYBACK dial
Move PLAYBACK dial
up and down, and
choose each number
to set date, and press
PLAYBACK dial.
FF (+INDEX)
REW (-INDEX)
PLAY/STOP