LEI Electronics TXDOCK - Manual (Page 29)

29
Docking Station with Video User’s Manual
How Standby or Hibernate Mode Affects Devices
Attached to the Docking Station
External Monitors
When the docking station is connected to a computer and an
external monitor, if the computer goes into standby or hibernate
mode, the external monitor display goes blank.
When the computer returns to an active state, the external
monitor display keeps the same settings it had before the
computer went into standby or hibernate mode. However, if
the add-on monitor was set for extended mode, windows that
were previously on the external monitor will not move back
to that secondary monitor. Also, if the add-on monitor is in
extended mode and the computer requires a login after standby
or hibernate mode, the login screen appears on the primary
computer monitor, not the external monitor.
If the computer is shut down, restarted and logged in, again
the add-on monitor returns to the same mode as it was before
shutdown.
Other Devices
If another device is connected to a port on the docking station
and the computer goes into standby or hibernate mode, that
device will not function. For example, if you are using the
Ethernet port for high-speed network access, network access will
not be available until the computer returns to an active state.
4. Uninstalling the Drivers
Uninstalling the USB or Ethernet Display Adapter Driver
Please take these steps to uninstall Driver:
1. Open the Control Panel and double-click Programs and
Features on Vista or Add or Remove Programs on 2000/XP.