Lumens Technology CL510 - Manual (Page 29)

English - 28
6.21.1.2 I would like to check the network settings
DHCP is enabled by default. Please follow the steps below to check
the IP address.
1. Press [MENU] on the Remote Control to enter the setting menu.
2. Press [] or [] to the [Advanced] menu.
3. Press [] or [] to the [Ethernet].
4. Press [ENTER] to open the Ethernet OSD menu.
5. Press [MENU] to exit OSD menu.
6.21.1.3 View the live image
A. Use IE browser
Please modify web page security setting and install ActiveX controls according to
Ethernet
DHCP
IP address
Netmask
Getway
ON
2
3
1