Marantz CD5003 - Manual (Page 18)

15
NAMES AND FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERA
TIONS
ADV
ANCED
CONNECTIONS
ADV
ANCED
OPERA
TIONS
TROUBLESHOOTING
OTHERS
ADV
ANCED
OPERA
TIONS
ENGLISH
ADVANCED OPERATIONS –AUDIO CD–
7 Skipping tracks during random
play to search other tracks
When the ¡/¢ button on the player or ¢
button on the remote control unit is pressed during
random play, the next track is selected at random
and played.
Conversely, when the
4/1 button on the player
or 4 button on the remote control unit is pressed
during random play, play returns to the start of the
track now playing.
AMS PLAY (SEARCHING
FOR A SPECIFIC TRACK)
All track intros, from the first track onward, are
played back in sequence, which is useful when
searching for a desired track.
You can choose whether to play 10, 20 or 30
seconds of each track.
During stop or play, press the AMS (auto music
scan) button on the remote control unit.
Press the AMS button repeatedly to switch through
the different scan modes.
“
” , “ ” , “ ” , “
”... ( aborts the scan
function) light on the display, and the “ 3” indicator
flashes.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
5 5
5 5 5 5
Flashes
All track intros, from the first track onward, are played
back in sequence, for the amount of time they have
been preset (10 sec. when first purchased).
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
TTL TRK TIME
5 5
5 5 5 5
Flashes
Once the track you want to hear has been found,
press the
3 button. The “3” indicator now lights,
and the track found and whatever comes after that
track will now be played normally.
When the RANDOM button on the remote control
unit is pressed during AMS play, the AMS play
function is released, and the random play mode is
established.
WHILE PLAYING, REPLAY A
SMALL TRACK PORTION AND
LISTEN AGAIN (QUICK REPLAY)
If the Q.REPLAY button is pressed during playback,
the play position will jump back by the length of time
set in MENU, and then resume.
Note:
Jump back cannot go beyond the beginning of
the current track.
When the Q.REPLAY button is pressed, if the
total length of the track being played is shorter
than the time set for quick replay, or if the track
elapsed playing time is shorter than the time set
for quick replay, the play position will return to the
beginning of the track and resume playing.
How to set the Quick Replay time
1. If there is a disc in the disc tray, remove the disc
and close the tray.
2. Press the MENU button on the remote controller
once then the 7 button four times.
The display will indicate “Quick Replay.”
3. Press the ENTER button of the remote control.
The currently time setting will be displayed
(at the time of purchase, this is set to 10
seconds).
CD5003_U_01_ENG.indd 15 CD5003_U_01_ENG.indd 15 08.6.19 8:22:07 AM 08.6.19 8:22:07 AM