Marantz SA7003 - Manual (Page 27)

23
N
a
m
es
a
N
d
Fu
N
ct
IO
N
s
B
a
sI
c
cO
N
N
ec
tI
O
N
B
a
sI
c
O
pe
ra
tI
O
N
a
d
Va
N
ce
d
cO
N
N
ec
tI
O
N
s
tr
Ou
Bl
es
HO
Ot
IN
G
O
tH
er
s
tr
Ou
Bl
es
HO
Ot
IN
G
ENGLISH
a
pp
lI
ca
tI
O
N
O
pe
ra
tI
O
N
trOuBlesHOOtING
If you think that something is wrong with your player, first check the points listed below. Incorrect operations
can sometimes be taken for trouble and malfunctions. If the trouble persists even after the following points
have been checked, consult your dealer or nearest Marantz sales office or service center.
Problem Cause Corrective action
The disc fails to rotate.
The power cord is pulled out of the
socket.
Insert the power cord plug into the
socket. (→ Page 9)
Power to this unit is not ON.
Turn the power to this unit ON.
(→ Page 10)
The disc is not placed in the correct
position on the disc tray.
Place the disc in the disc tray correctly.
(→ Page 10)
The disc is placed in upside down. (The
disc is placed in with the label facing
down).
Place the disc in the disc tray correctly.
(→ Page 10)
The disc stops rotating in
mid-operation.
The disc is dirty. Clean the disc’s surface. (→ Page 28)
The disc is scratched.
The disc may be unable to be played if
it has a lot of scratches.
The disc is warped.
The disc may be unable to be played if
it is badly warped.
The disc is rotating but no
sound is heard.
The amplifier and speakers are not
connected correctly.
Connect the cables correctly.
(See the instruction manual for the
amplifier.)
The amplifier power is not ON.
Turn ON the power to the amplifier.
(See the instruction manual for the
amplifier.)
The amplifier’s function or selector
switch is not set to “CD” or “AUX” or
such (to whatever you have connected
this unit to).
Switch the amplifier’s function or
selector switch to “CD” or “AUX” or
such (to whatever you have connected
this unit to).
(See the instruction manual for the
amplifier.)
The amplifier’s volume control is set at
the minimum level.
Adjust the amplifier volume.
(See the instruction manual for the
amplifier.)
Problem Cause Corrective action
Remote control operation is
not possible.
The distance between this unit and the
remote control is too great.
Move closer to this unit, and operate
the remote control within the
operating range. (→ Page 4)
There is an obstacle between this unit
and the remote control.
Remove the obstacle. (→ Page 4)
The remote control’s batteries are dead. Replace all batteries with new ones.
(→ Page 4)
A strong light is hitting the unit’s sensor
window.
Do not let strong light hit the sensor
window. (→ page 4)
The switch on the back of the REMOTE
CONTROL is on EXTERNAL.
When using this unit independently,
set the switch to INTERNAL. (→ Page
12)
CD-R/CD-RW disc cannot be
played.
The disc is placed in upside down.
Place the disc in the tray correctly.
(→ Page 10)
The information recorded is not in an
audio (CD-DA) format. Or the MP3/
WMA file was not properly recorded.
Record correct information that is
compatible with to this unit. (→ Page
28)