Marantz AV8003 User Manual

Page 56

Advertising

CONNECTIONS

SETUP

BASIC

OPERA

TION

REMOTE

CONTROLLER

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTION

ADV

ANCED

OPERA

TION

ENGLISH

ZONE PLAYBACK USING THE SURROUND
BACK PREOUT TERMINALS

This unit allows you to connect another set of power
amp and place them in a different ZONE or separated
area for Iistening to music.

TOP

ZONE

SPEAKER

DISPLAY

INPUT

7.1CH

DIRECT

PURE

PHONES

THX

M-DAX

MODE

SURROUND

CLEAR

MEMORY

T-MODE

BAND

EXIT

ZONE

DOWN

VOLUME

INPUT

SELECTOR

AUTO

SETUP MIC

HDMI

M-DAX

PURE DIRECT

POWER ON/OFF

STANDBY

AV PRE TUNER AV8003

ENTER

Pressing

the

ZONE SPEAKER button on the

unit one time accesses the ZONE SPEAKER
A settings. Pressing it two times accesses the
ZONE SPEAKER B settings. Then, pressing it
a third time turns the ZONE SPEAKER feature
off.

When the ZONE SPEAKER setting mode is

engaged, one of the following screens appears
on the display for 10 seconds.

* Display when ZONE SPEAKER A is selected

Z S A D V D - 1 8 d B

* Display when ZONE SPEAKER B is selected

Z S B D V D - 1 8 d B

Select an input source with the INPUT

SELECTOR knob.

Turn

the

VOLUME knob to set the volume of

the ZONE used in the zone system as you
like.

Note:

• The sleep timer, monaural output and other features

can also be set using the MAIN MENU. (See page
35.)

Notes for Zone Speaker

• The Zone Speaker mode can be set for only one of

the ZONEs, A or B.

• The ZONE SPEAKER output can be used when

Surround Back Speaker = “NONE, ZSP A or ZSP
B” in the SPEAKER SETUP menu. (See SPEAKER
SETUP, page 29)

• “The Surr. Back Speakers are in use” is displayed

when the ZONE SPEAKER button is pressed when
the Surround Back Speaker is not set to “NONE,
ZSP A or ZSP B” in the SPEAKER SETUP menu.
(See SPEAKER SETUP, page 29)

• The Zonespeaker mode cannot be used at the same

time as the speaker C. When connecting for zone
use, set the SPEAKER C selector switch on the rear
panel to OFF.

• When the unit is put in ZONE SPEAKER mode and

ZSP A or ZSP B has been set as the Surround Back
Speaker (P.29), the ZONE SPEAKER function can
be turned on automatically simply by pressing the
SOURCE button.

CONTROLLING THE ZONE FUNCTION FROM
ANOTHER ROOM

The ZONE function can be controlled from another
ZONE, even from a ZONE not set for this unit, by
connecting a MARANTZ product with external IR
receiver or infrared receiver using the RC2001 or
Zone remote controller RC101. (See page 17)

SET THE REMOTE CONTROLLER TO A MODE THAT
CONTROLS ZONE A OR B.

Operations such as switching the input source
between ZONE A and B and turning the ZONE
function on/off can be performed by setting the
ZONE for using the remote controller.

<RC2001>

Press

the

HOME button.

Press

the

</> button umtil 003 is displayed.

Press

the

ZONE-A or ZONE-B button.

<RC101>
ZONE A mode (default setting)
ZONE B mode
ZONE C mode (this zone not used by this unit)
ZONE D mode: MAIN ZONE (the ZONE in which this
unit is installed)

(In the example given here, the user changes

the mode used to control ZONE A.)

Hold

down

the

SET button and ZONE button

simultaneously until the Send indicator fl ashes
twice. The backlight lights.

Press

the

ZONE A button. The Send indicator

fl ashes twice when the setting is complete.

The following buttons are now used for ZONE

A only. Volume adjustment, sleep timer, mute,
and input functions can be selected from the
ZONE.

POWER ON/OFF

SOURCE

INFO

SLEEP

VOL +/–

MUTE

Once the operation in

is performed, pressing the

ZONE B button switches the mode being controlled
to ZONE B. Pressing the ZONE D button switches
the mode being controlled to MAIN ZONE.

Notes:

• When using a tuner (AM or FM) in the MAIN

ZONE and tuner is selected for the input function of
ZONE, the tuner cannot be used from ZONE. Only
the same broadcast as that being used for MAIN
ZONE can be listened to.

• ZONE output is analog only. Digital signal input is

not supported.

AV8003N.indb 52

08.4.28 10:49:32 AM

Advertising

Popular Brands

Popular manuals