Marantz AV8003 - Manual (Page 57)

CONNECTIONS
SETUP
BASIC
OPERA
TION
REMOTE
CONTROLLER
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
ADV
ANCED
OPERA
TION
53
ENGLISH
CONTROLLING ZONE SPEAKERS
<RC2001>
Switch the remote controller to ZONE-A or ZONE-B
mode.
ZONE Speakers can be controlled on the fi rst page
of the remote controller.
<RC101>
An RC101 remote controller set to ZONE A or ZONE
B can be switched to control the ZONE Speaker
function.
1.
2. 1.
3.
1. (In the example given here, the setting for
ZONE is switched to the setting for ZONE
Speakers.)
Hold down the SET button and POWER ON
button simultaneously until the Send indicator
fl ashes twice.
The backlight continues to fl ash.
2. Press numeric key 2.
ZONE mode: 1 (default setting)
ZONE Speaker mode: 2
Notes:
• To restore the settings for ZONE, press numeric key
1 in step 2.
• Only the MAIN ZONE can be controlled when
ZONE D mode is set.
3. Press the ENTER button. Once settings are
complete, the Send indicator fl ashes twice.
The following buttons are used for set ZONE
mode or ZONE Speaker mode only.
POWER ON/OFF
SOURCE
INFO SLEEP
VOL +/–
MUTE
OSD INFORMATION DISPLAY ON THE ZONE
MONITOR
The setting status of ZONE A can be displayed on a
TV monitor connected to the video output for ZONE
(ZONE OUT) terminals.
<RC2001>
2.
1. Switch the remote controller to ZONE-A mode.
2. Press the INFO button.
<RC101>
1.
1. Press the INFO button.
OSD information is displayed on the ZONE
monitor.
Z O N E A
V I D E O : D S S
A U D I O : D S S
S L E E P : 9 0 m i n
M O N O / S T : S T E R E O
O S D I N F O : E N A B L E
Z O N E : O N S P K R : O F F
V O L : V A R I V O L : V A R I
L E V E L : - 2 0 d B L E V E L : - 9 0 d B
- - - M A I N Z O N E S T A T U S - - -
V I D E O : D V D A U D I O : D V D
Notes:
The OSD cannot be displayed on the ZONE monitor
when the OSD is being displayed for ZONE.
AV8003N.indb 53 AV8003N.indb 53 08.4.28 10:49:32 AM 08.4.28 10:49:32 AM