MBM Corporation Maxxum 91 corner stapler - Manual (Page 10)

Corner Stapler Model 91 Operator Manual
T10125 September 2001
1. Open the Corner stapler input housing by pressing the input
housing latch, to get access to the stapler, and remove the
stapler cartridge.
For instructions see previous item 5.1.
2. Use a small soft brush to dislodge / remove any mylar and
glue residue in the staple cartridge area.
3. This is recommended to regularly when a new staple cartridge
is installed.
5.2 Cleaning the stapler heads
5-2