MBM Corporation ES 5500 - Manual (Page 14)

- 14 -
OP Button / Display
Batch Mode on/off
Press [Count] button for activating the batch count function. And press [Count] button
once again for deactivating the function.
Adjust Batch Count
The batch count adjusting menu is appeared through holding the [Count] button.
You can change the value by using the [Direction] buttons and confirm the count by
holding the [Count] button again.
Auto Start Mode (ASM) on/off
Press [ASM] button to activate the auto start mode(ASM). And if [ASM] button is pressed
once again, the ASM is turned off.
The batch mode is operated continuously if the ASM is activated and the interval of each
batch work is 3 seconds.
Batch Mode
Ready 0
B100 0
ASM Mode